Audio Technologies

Rounded Rectangle:

TP-13  SPECIFICATIONS

# Πολύ χαμηλή παραμόρφωση # MC/MM είσοδοι πικάπ # Ψηφιακή είσοδος USB # Ασύρματος δέκτης Bluetooth audio # Προαιρετικά ρυθμιστικά μπάσων πρίμων

 

Προενισχυτής είναι ένας ηλεκτρονικός ενισχυτής που μετατρέπει ένα ασθενές ηλεκτρικό σήμα, σε ένα σήμα χαμηλής παραμόρφωσης και χαμηλού θορύβου, αρκετά ισχυρό για την οδήγηση ενός ενισχυτή ισχύος.

Χωρίς αυτή την ενίσχυση, το τελικό σήμα θα ήταν θορυβώδες ή παραμορφωμένο.

Ο TP-13 είναι πολύ γραμμικός καί έχει σταθερό κέρδος στο εύρος λειτουργίας του.

Έχει υψηλή αντίσταση εισόδου που απαιτεί μόνο ελάχιστη ποσότητα ρεύματος και χαμηλή αντίσταση εξόδου.

Έτσι όταν το ρεύμα αντλείται από την έξοδο υπάρχει ελάχιστη αλλαγή στην τάση εξόδου.

Αυξάνει την ισχύ του σήματος για να οδηγήσει το καλώδιο και μετά τον ενισχυτή ισχύος χωρίς να υποβαθμίσει την αναλογία σήματος προς θόρυβο.

Ο συμπεριλαμβανόμενος ασύρματος δέκτης ήχου Bluetooth καί η ψηφιακή είσοδος USB συνδυάζουν τη συνδεσιμότητα και τη χρηστικότητα, χωρίς να θυσιάζεται η ποιότητα του ήχου.

Προαιρετικά τοποθετείται μία πλακέτα ρύθμισης μπάσων-πρίμων με διακόπτη αναίρεσης.

Ο προενισχυτής TP-13 φέρνει ένα νέο επίπεδο απόδοσης με διαφανή, ανοιχτό και λεπτομερή ήχο.

# Very low distortion # MC/MM phono inputs  # USB digital input # Bluetooth wireless audio receiver # Optional bass and treble controls

 

Preamplifier is an electronic amplifier that converts a weak electrical signal, into a low distortion and low noise signal, strong enough for driving a power amplifier.

Without this amplification, the final signal would be noisy or distorted. 

TP-13 is very linear and has constant gain through its operating range.

It has a high input impedance that require only a minimal amount of current and a low output impedance.

So when current is drawn from the output there is minimal change in the output voltage.

It boost the signal strength to drive the cable and then the power amplifier without degrading the signal to noise ratio.

If your favorite home audio system lacks Bluetooth, you don’t have to invest in an entirely new setup just to enjoy streamed audio from your computer or mobile device.

The included wireless Bluetooth audio receiver and USB digital inputs combine connectivity and usability, without sacrificing audio quality.

A choice of single-ended RCA or balanced XLR at input 2 is selectable with a back-side switch.

Optionally is installed a treble-bass control board with defeat switch.

TP-13 preamplifier brings a new level of performance with a transparent, open and detailed sound.

FREQUENCY RESPONCE: 0db points from 10 to 30KHz.

DISTORTION: Less than 0.002%@1VRMS analog output.

GAIN: Main analog output x6, tape analog output x1.

ANALOG INPUTS IMPEDANCE: 47Kohms line, 47Kohms phono MM, 100/220ohms phono MC.

ANALOG OUTPUT IMPEDANCE: 1200 Ohms.

ANALOG INPUTS: 2 line, MM phono, MC phono.

DIGITAL INPUTS: Bluetooth wireless, USB.

INPUT SENSITIVITY: 1V line inputs, 4mV phono MM, 0.2mV phono MC.

MAXIMUM ANALOG OUTPUT: 8VRMS.

NOISE: -115db line input, -96db MM input, -86db MC input.

OPTIONAL: Bass and Treble PCB with Defeat switch (+- 10db adjustment).

TRIGGER: Output +12VDC.

POWER REQUIREMENTS: 115-230VAC 50/60Hz.

DIMENSIONS: 37x22x12cm.

WEIGHT: 7kg.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

TP-13  stereo preamplifier

Text Box: Copyright 2021 Audio Technologies, Miltiadis Logothetis Laboratory, All Rights Reserved.
Rounded Rectangle: view TP-13 pictures###and measurements

          HOME        PRODUCTS        TECHNOLOGIES        ABOUT        CONTACT        SERVICE-PARTS-TUBES